Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

哨兵2卫星综合水质指标的河流水质遥感监测方法

上海市河流水污染监测是当前研究的热点问题。针对上海市河流水质监测的需求,提出了一种基于因子分析的河流综合水质遥感反演的方法。以欧洲航空局发射的哨兵-2A(Sentinel-2A)卫星搭载的多光谱成像仪获取的遥感影像,以及准同步获取的河流断面实测水质参数数据为例,研究对象为上海市青浦区和松江区部分河道。选取高锰酸盐指数、氨氮等5项主要水质参数为监测指标,在因子分析的基础上建立水质遥感反演的模型,得到综合水质指标用于确定水质类别。实验结果表明:综合水质指标值越小,内陆河流水质状况越良好,水体更清洁。该方法能够应用于内陆河流水质遥感监测,为水环境管理部门提供参考信息。     

飞行器智能设计愿景与关键问题

未来飞行器正朝着多元化、无人化和智能化的方向发展，高超声速、超隐身和变体等新型飞行器不断涌现。而传统飞行器解耦分拆的设计方法越来越难以满足未来飞行器综合性能全面提升的要求，只有通过整体化设计才能充分发掘飞行器的潜能。通过分析传统飞行器设计中存在的问题，提出满足全生命周期要求的飞行器智能设计体系理念，利用知识库的构建将智能赋予飞行器平台系统设计、制造生产和运维这3个阶段，并通过数字孪生技术进行飞行器全生命周期的仿真、分析和预测，以对飞行器设计、运行等数据进行更新，使该体系形成闭环。就飞行器智能设计体系中需要的关键技术及涉及的科学问题等进行了讨论，并给出了未来发展方向以供参考。     

移15°双十二相隐极同步整流发电机数学模型的研究

分别在abc坐标系和dq0坐标系下建立了移15°双十二相隐极同步整流发电机的基本数学方程,推导了电机电压、磁链、输出功率、电磁转矩和转子运动方程。在MATLAB/Simulink中建立了移15°双十二相隐极同步整流发电机的仿真模型。对两路输出进行了不平衡负载仿真和试验。仿真与试验结果相比基本一致,验证了移15°双十二相隐极同步整流发电机数学模型的正确性。这为双十二相同步整流发电机运行性能和励磁控制系统的研究奠定了基础。     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值，存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave，CW）测试，对无线信号穿墙损耗的影响因素和变化规律进行分析，提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法，对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则，在实际场景下具有良好的预测准确度。     

考虑测试性设计缺陷修正延时的测试性增长模型建模与评价方法

针对现有测试性增长模型忽略了测试性设计缺陷的修正延时过程，进而导致测试性增长模型（TGM）跟踪与预计精度低的问题，提出了一种考虑测试性设计缺陷修正延时的测试性增长模型建模理论与方法。首先分析测试性设计缺陷识别与修正之间的延时机理，得到剩余测试性设计缺陷（TDL）具有先增后减的铃形变化趋势；在此基础上，分别以Gamma、Raleigh和Delay-S 3种曲线拟合剩余测试性设计缺陷（RTDL）变化趋势，研究建立基于以上3种曲线考虑修正延时的测试性增长模型；最后，以某机载稳定跟踪平台测试性增长试验数据验证测试性增长模型拟合、跟踪及预计效能。研究结果表明：基于该测试性增长试验数据，Gamma曲线可以精确地拟合剩余测试性设计缺陷变化规律，测试性增长模型跟踪和预计精度可达到10^-2数量级。     

某框基于后置程序逆向设计及数字化高效加工研究

介绍了飞机某框从逆向设计到数字化高效加工详细流程,应用以CATIA V5、VERICUT为代表的先进数字化制造技术,使零件数字化设计、数字化加工、工艺流程得到全面改进,为今后零件逆向设计及数字化加工奠定良好的基础。     

Multiscale topology optimization using feature-driven method

This paper presents a multiscale design method for simultaneous topology optimization of both macrostructures and microstructures. Geometric features are extended as design primitives at both macro and micro scales and represented by Level Set Functions (LSFs). Parameters related to the locations, sizes, and orientations of macro and micro features are considered as design variables and optimized simultaneously. In the overlapping areas of different macro features, embedded microstructures are optimally figured out as the solution of the corresponding sub-optimization problem. In this study, the eXtended Finite Element Method (XFEM) is implemented for structural and sensitivity analyses with respect to design variables. This method has the advantage of using a fixed grid independent of the topology optimization process. The homogenization procedure is applied to calculate the effective properties of considered microstructures in each macro feature. Numerical examples are presented to illustrate the effectiveness of the proposed method. Results depict that the multiscale design cannot obviously improve structural stiffness compared with a solid-material design under the linear elastic condition.     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

叶片飞脱下转子动力学响应实验

为了研究大涵道比涡扇发动机叶片飞脱时动力学响应,更好地进行发动机安全性设计,根据相似理论设计了包含叶片飞脱装置的突加不平衡实验系统并进行了实验验证。研究结果表明:设计的突加不平衡实验系统,与某型验证机相似度高,代表性强,能够有效可控地进行突加不平衡实验,重复性好,机理清晰且飞脱不平衡量大,能够真实地模拟发动机叶片飞脱响应。通过实验发现,当大突加不平衡发生时,频谱出现超次谐波并且冲击系数由于挤压油膜阻尼器限幅作用并不呈现线性关系,因而在后续研究中还应注意限幅导致的碰摩问题。